How to Charge an Apple Tv Remote Control?

To charge an Apple TV remote control, you will need to use a Lightning cable that is compatible with your device. Connect one end of the cable to the port on the back of your remote and plug the other end into a USB power adapter. Once connected, it should begin charging automatically.

Make sure you do not disconnect it while in use as this can damage both the remote and your Apple TV system. It typically takes around 1-2 hours for a full charge but may take longer depending on usage and battery life. When finished charging, unplug from both ends and store away until next time!

  • Step 1: Locate the remote control. The Apple TV remote is usually located near the Apple TV device itself, connected to it with a USB cord
  • Step 2: Connect one end of the USB cord to an available USB port on your computer or charging port (such as a wall charger)
  • Step 3: Plug the other end of the USB cable into the back of your Apple TV remote control. You will see two ports at this location; plug into either one depending on what type of cable you have (Lightning or micro-USB)
  • Step 4: Allow time for charging. It can take several hours for your remote control to fully charge but you should start seeing power after only a few minutes

Apple TV 4K How to Charge Remote Control & Check Battery!

How Do I Charge My Apple Remote Tv?

Charging your Apple TV remote is a simple process that you can do with ease. To begin, locate the Lightning port on the bottom of your remote and insert one end of an Apple-certified Lightning cable into it.

The other end should be plugged into a power adapter or USB port on either your television set or another power source such as a laptop computer or wall outlet.

Once connected, you will see an orange light flashing from your remote’s status indicator at the top left side near where you press down to activate Siri. This indicates that charging has begun and will take several hours before being fully charged.

You can also check if charging is complete by pressing any button on the remote; if it responds, then charging has been successful!

Be sure to unplug the cable when finished in order to save energy and prevent overcharging that may damage your device’s battery life.

How Do I Know If My Apple Tv Remote is Charging?

If you have an Apple TV remote but are unsure if it is charging properly, there are a few ways to tell. To check the battery level of your remote, open the Remote app on your iOS device and select the Devices tab at the bottom of the screen. If you see a green light flashing next to your remote’s name in this list, then it is currently charging.

Additionally, when connected to power via USB-C or Lightning cable, small orange lights will appear around either side of the Touch surface to indicate that it is being charged.

Finally, when fully drained and connected for charging for more than 15 minutes an amber or orange light should appear at the bottom center of your remote – indicating that it is now powered up again!

Does Apple Tv Remote Light Up Charging?

The Apple TV Remote can be used to control your Apple TV, but does it light up when it’s charging? The answer is yes! When the remote is plugged into a power source, an LED indicator will appear on the front of the remote near its lightning port.

This lets you know that your remote is being charged and ready for use. You can even check whether or not it needs more charge by taking a glance at this LED indicator – if it’s solid green then you’re good to go, however if its blinking red then that means you need to plug in some juice.

And with all those buttons, you’ll probably want to keep your device fully charged so you don’t miss any commands or have any lag time while using the tv.

So make sure next time your watching movies or playing games with friends that your apple tv remote has enough battery life left before beginning!

Can You Charge the Apple Tv Remote from the Apple Tv?

It’s no secret that Apple makes products that are designed to work together seamlessly. The same is true of the Apple TV and its remote control, which can be charged directly from the back of the device using a USB-C cable.

This means you don’t have to worry about looking for extra batteries if your remote runs out of charge – just plug it in and keep watching.

Not only does this save you time and money, but it also helps reduce waste by eliminating disposable batteries from the equation entirely.

Plus, since there are plenty of other devices that use USB-C cables (from phones to tablets), chances are you already have one lying around somewhere making charging even easier. All in all, charging your Apple TV Remote directly from the device is an easy way to ensure it always has enough juice when you need it!

How to Charge Apple Tv Remote (3Rd Gen)

Charging your Apple TV Remote (3rd Gen) is easy and fast. To charge it, simply connect the included Lightning to USB cable between the remote and a USB port on your Mac or PC. You can also use an AC adapter with a 5V/1A output rating that you plug into a power outlet.

When fully charged, the light indicator will turn green and you’ll be ready to go!


This blog post provided a step-by-step guide to charging an Apple TV remote control. By following the steps outlined in this post, you should now have a fully charged remote control and be ready to use your Apple TV! Charging the remote control is an essential part of being able to enjoy all of the features that come with owning an Apple TV.

With regular charging, your experience can remain optimal for as long as possible.

About Jeffrey Wood

Jeffrey Wood is a senior content writer at the Techsily. He's having 5 years of experience in Technology and troubleshooting topics. Coming from a background of engineering, you will often see his writing stuff related to How To's, Android, and iOS.