How to Connect a Universal Remote to Samsung Tv?

To connect a universal remote to a Samsung TV, start by turning on the TV and the universal remote. Then press and hold the “Setup” or “Program” button on the remote for 3 seconds until the light at the top of it turns on. Use your remote to input information about your TV, such as its make and model number; this should be printed on a label near where you plug in cables.

Once you have entered this information correctly, test out some of your buttons (e.g., volume control) to see if they are working with your Samsung TV. If not, repeat these steps again from scratch until everything is properly connected and functioning correctly.

  • Step 1: Turn on your Samsung TV and the device you want to control
  • Step 2: On the back of your remote, slide the mode switch to TV
  • Step 3: Find a code for your device’s brand using either the user manual or an online search
  • Most universal remotes have a list of codes associated with different brands
  • Step 4: Press and hold down both the “TV” button and then press the “Power” button until your Samsung television turns off
  • This should take about 5 seconds
  • Step 5: Enter in one of the codes listed for your brand into your remote by pressing each number individually until it appears on screen
  • Once done, release both buttons simultaneously
  • Step 6: If successful, you will see a confirmation message appear on-screen that indicates that it has been synced with your remote control successfully; otherwise, repeat steps 4 & 5 again until you find an appropriate code which works correctly with your device

How Do I Connect My Universal Remote to My Tv?

Connecting a universal remote to your TV is actually quite simple. First, you will need to locate the “TV” button on your remote control. Once located, press and hold this button until all four mode lights blink twice.

Next, you will want to find the code for your television brand in the owner’s manual that came with your device or online. Then enter the three-digit code using either the number buttons or channel up/down arrows for most remotes (the exact method can be found in your owner’s manual). If done correctly, one of the mode light should remain lit after entering each digit of the code; if not then repeat steps 2 and 3 with another code from your list until you have successfully connected to your TV.

Finally test out basic functions such as power on/off and volume using different buttons on your remote control – once these work then you know it has been properly configured!

What is the Code for Samsung Tv on a Universal Remote?

If you have a universal remote and are trying to figure out the code for your Samsung TV, there is no one-size-fits-all answer. Depending on the make and model of your television, as well as the specific type of universal remote you’re using, different codes may be necessary to pair your device with the remote. Fortunately, Samsung makes it easy to find what code works best for you by providing an online database that can be searched based on both your TV’s make and model number, as well as the brand name or code from your universal remote.

To get started with this process, locate both pieces of information: Your Samsung TV’s model number (which is usually visible on either its back panel or in its settings menu) and then look up which four or five digit code corresponds with it from within the list provided on Samsung’s website. Once you’ve found this information, enter it into your universal remotes setup menu (usually located under ‘Device Setup’) in order to successfully sync it with your television set!

How Do I Get My Samsung Tv to Recognize My Remote?

If you’re having trouble getting your Samsung TV to recognize your remote, it could be because of a number of possible issues. First, check the batteries in your remote and make sure they are properly inserted into their compartments. If the batteries are dead or need replacing, try that first before looking any further.

Another possibility is that there is an issue with the infrared eye on either the remote or on the TV itself and this can cause problems with recognition. Try unplugging both devices for several minutes and then plugging them back in again; this may help reset any connection between them. If neither of these solutions work, you may need to contact Samsung customer service for additional assistance.

How to set up the Universal Remote of your Samsung Smart TV

How to Connect a Universal Remote to a Samsung Tv Without Remote

If you don’t have the original Samsung remote to connect your television, there is still a way for you to program your universal remote. You can do this by accessing the TV’s menu and using its built-in tools to manually enter codes required for pairing it with the universal remote. To access these menus, press buttons such as “Input” or “Source” on your TV while pressing various combinations of number keys until the correct menu appears.

Once in the menu, search through each options until it prompts you to enter a code from your universal remote manufacturer; inputting this code will allow you to successfully link them together.


By following the steps outlined in this blog post, you should be able to successfully connect your universal remote to your Samsung TV. Make sure that you have all of the necessary materials before getting started and always refer back to the user manual if needed. With a few simple steps, you can be up and running with your universal remote control in no time!