How to Connect Tineco S3 to Wifi

To connect the Tineco S3 to your WiFi network, first make sure that you have a 2.4GHz Wi-Fi router with no password or one that uses WPA/WPA2 security encryption. Then, turn on the vacuum cleaner and press the “Wi-Fi” button for about five seconds until it flashes green.

Next, take out your phone or tablet and go into settings>Wi-Fi networks; select your home Wi-Fi from the list of available connections and enter its password when prompted.

Finally, press the “confirm” button on Tineco S3’s control panel to complete connection process. If all goes well then you will see a blue light indicating successful connection between Tineco S3 and your wireless network.

  • Download the Tineco app from your phone’s App Store or Google Play: Before you can connect your Tineco S3 to wifi, you first need to download the free Tineco app on your smartphone
  • Connect Your Phone to Wifi and Launch The Tineco App: Once you have downloaded the app, connect your phone to a wifi network and launch the app by tapping on its icon
  • Log Into Your Account or Create an Account: In order to use the full range of features provided by the software, it is necessary for users to log into their existing account or create an account with their email address if they do not already have one set up
  • Add The Vacuum Cleaner To The App By Scanning Its QR Code: After logging in, select “Add Device” and then choose “Vacuum Cleaner” as type of device that needs connecting
  • Following this step will bring up a page where users can scan the QR code located at bottom of their vacuum cleaner using their phones camera directly within the application itself in order to add it successfully without any errors occurring during connection process
  • Enter Wifi Network Information And Tap On Connect Button To Complete Setup Process: Finally after successful addition of device on mobile application enter information regarding wifi network such as SSID (name) & password which user wishes for connection between two devices before tapping on “Connect” button present at bottom right corner in order finish setup process completely

Tineco Troubleshooting | App Connection | Tineco FLOOR ONE S3 | EN

Why is My Tineco Not Connecting to Wifi?

If your Tineco vacuum cleaner is not connecting to WiFi, it could be due to a variety of issues. First, make sure that the device is in close proximity to your wireless router and that no other electronic devices are obstructing its wireless signal.

Additionally, ensure that you have entered the correct password for your home network when setting up the connection on the vacuum cleaner.

If this does not fix the problem, try rebooting both your router and vacuum cleaner by powering them off and then back on again. If these solutions fail, contact Tineco’s customer support team for further assistance with troubleshooting.

How Do I Connect My Tineco to the App?

To connect your Tineco to the app, first make sure that you have downloaded and installed the latest version of the Tineco App from either Google Play or the Apple App Store. Once installed, open up the app and follow its on-screen instructions for creating an account.

Then, open up your device’s Bluetooth settings and make sure it is enabled; this will allow your phone to detect any available devices nearby.

Now press and hold down both power buttons on your Tineco vacuum cleaner until a light flashes blue; this indicates that it has been put into pairing mode.

Finally, select ‘Tineco’ in your phone’s list of available devices – once connected, you can now access all features within the Tineco App!

How Do You Use Tineco S3 for the First Time?

Using Tineco S3 for the first time is a straightforward process. To get started, all you need to do is plug in your device and turn it on by pressing the power button located on the handle. Once powered on, select your desired cleaning mode – either Auto or Manual – using the control panel at the top of handle.

Then press start/pause button to begin cleaning. The motorized brush head and powerful suction will help remove dirt and debris from surfaces as you move around your home.

Additionally, use attachments such as crevice tool or upholstery nozzle for more detailed areas like furniture corners and stairs that may require extra attention.

Finally, when finished vacuuming press start/pause to power off then unplug before storing away until next use!

Can You Use Tineco Floor One S3 Without Water?

No, the Tineco Floor One S3 cannot be used without water. The Tineco Floor One S3 is a cordless hard floor vacuum cleaner with an integrated mop system that uses powerful suction and a spray of clean water to remove dirt and debris from floors.

This means you must use both suction power and clean water in order for it to effectively pick up debris.

Without any water, this vacuum would not be able to properly lift dust or other particles off of your floors.

Why Does Tineco Have Wifi

Tineco has wifi so that owners can connect their vacuum to the Tineco app and access powerful features like Smart Suction Control, Auto Suction Adjustment, Automatic Cleaning Schedule and more.

This allows users to control the cleaning process from any location with an internet connection and monitor progress in real-time. With this added convenience, it’s never been easier for busy households to keep up with regular vacuuming chores.


Overall, connecting the Tineco S3 to wifi is a fairly simple process. With just a few steps, you can connect your device to the wifi network of your choice and enjoy all the benefits that come with it.

Additionally, if you experience any issues during setup, there are plenty of resources available online to help you out.

So don’t let technical difficulties keep you from using this powerful vacuum!

About Carolina Gomez

Carolina Gomez is a Senior Editor with 6 years of experience in the industry. Based in USA, He is extremely skilled at Windows related to How to Troubleshooting matters. His favorite topics are Windows 11, Android, and How To's.