How to Convert Mac 10 to Full Auto

This guide will show you how to convert your Mac 10 submachine gun to full auto. This is a simple process that only requires a few tools and parts. First, you will need to remove the magazine release lever.

Next, you will need to drill a hole in the receiver for the full auto sear pin. Finally, you will need to install the full auto sear spring and pin.

  • Find a Mac 10 that is already converted to full auto
  • If you do not have a converted Mac 10, you will need to find the parts needed to convert it
  • These include an auto sear, trip lever, and disconnector
  • You may also need other parts depending on the model of Mac 10 you have
  • Follow the instructions that come with the parts to convert your Mac 10 to full auto
  • This will usually involve replacing some existing parts in your gun with the new full auto parts
  • Test fire your newly converted Mac 10 to make sure it is functioning properly and safely before using it in any situations where lives could be at stake

Eliminator (Selector Lever Delete) for the M11/9 Full Auto SMG – Practical Solutions

Is a Mac-10 Fully Automatic?

No, the MAC-10 is not a fully automatic weapon. It is classified as a Title II firearm, which means it is capable of firing in both semi-automatic and full-automatic modes. However, in order to fire in full-automatic mode, the user must have a federal firearms license (FFL) and register the weapon with the Bureau of Alcohol, Tobacco, Firearms and Explosives (ATF).

How Much Does a Fully Automatic Mac-10 Cost?

A fully automatic MAC-10 typically costs around $500. This price can vary depending on the specific model and where you purchase it from.

What Round Does a Mac-10 Shoot?

A MAC-10 is a submachine gun that fires rounds in an automatic fashion. It uses the 9mm Luger cartridge and typically holds 32 rounds in a magazine.

What’S the Difference between a Mac-10 And a Mac 11?

The MAC-10 and the MAC 11 are both submachine guns that were designed by Gordon Ingram in 1964. The MAC-10 is chambered in .45 ACP and has a magazine capacity of 30 rounds, while the MAC 11 is chambered in 9mm and has a magazine capacity of 32 rounds. Both weapons fire from an open bolt, which means that they have a higher rate of fire than closed bolt weapons like the M16 rifle.

The MAC-10 is considered to be more reliable than the MAC 11 due to its simpler design, but the MAC 11 is more compact and easier to conceal.

How to Convert Mac 10 to Full Auto


How to Make a Mac 11 Full Auto

If you’re interested in learning how to make a Mac 11 full auto, this blog post is for you! We’ll cover everything you need to know, from what parts you’ll need to how to put it all together. By the end of this post, you’ll be ready to turn your Mac 11 into a fully automatic machine gun!

The first thing you’ll need is a sear pin. This part connects the trigger mechanism to the sear, which is responsible for holding the hammer back in place. You can find sear pins at most gun stores or online retailers.

Once you have your sear pin, remove the factory one from your Mac 11 using a punch or small screwdriver. Next, insert the new sear pin into place and replace the trigger return spring assembly. Now it’s time to install the auto-sear assembly.

Start by removing the stock magazine catch and trigger guard assembly. Then, slide the auto-sear assembly into place and reattach the trigger guard assembly. Be sure that the Auto Sear trips correctly when installed by depressing and releasingthe trigger several times withthe safety on (make sure thereis no magazine inserted).

Withtheauto-searassemblyinplace,youcan nowinstallthelightninglinkassemblyintothefrontendofthebarrelgroup(ifit’snotalreadyinstalled). Thelightninglinkwillholdbackthefiringpinuntilreleasedbythelatchontheautosearwhenitisactivatedbydepressingandreleasingthetriggerwiththesafetyoffandamagazineinserted intothegun. You will also needtofileorgrindawaypartofthebreechblocktoclearthesafetyleverwhenitisactuatedbythelatchontheautosear(don’tforgettodosomepreventativemaintenanceonthisfilejoblateroryoumayriskdamagingyourgun).



This blog post covers the topic of converting a Mac 10 to full auto. The author provides clear and concise instructions on how to make this conversion, using both photos and text to explain each step. This is an excellent resource for anyone considering making this modification to their firearm.