How to Clear Bluetooth Memory on Pioneer Avh-120Bt

It’s easy to clear the Bluetooth memory on your Pioneer AVH-120BT. Here’s how: First, press and hold the “SRC” button on the front of the unit for about two seconds. Next, use the rotary knob to scroll through the menu until you see “BT MEMORY” highlighted.

Press the knob to select it, then scroll down to “CLEAR”. Press and hold the knob for about two seconds to confirm. That’s it!

Your Bluetooth memory is now cleared.

  • Press the “Setup” button on your Pioneer AVH-120BT receiver
  • Select “Clear Bluetooth Memory” from the menu that appears on the display
  • Select “Yes” to confirm that you want to clear the memory and all paired devices will be deleted

How Do You Reset a Pioneer Avh 120Bt?

If you’re looking to reset your Pioneer AVH 120bt, there are a few different ways to do so. Here’s a step-by-step guide on how to factory reset your Pioneer AVH 120bt: 1. First, make sure that your Pioneer AVH 120bt is turned off.

2. Next, press and hold the “Menu” button on your unit for about 5 seconds. 3. Once the menu appears on the screen, use the “Rotary Knob” to scroll down to the “Setup Menu”. 4. In the “Setup Menu”, scroll down until you see the option for “Factory Reset”.

Select this option and confirm by pressing the “Enter” button. 5. Your Pioneer AVH 120bt should now be reset back to its factory settings!

How Do I Delete a Phone from My Avh 120Bt?

Assuming you would like instructions on how to delete a phone from the AVH 120bt: 1. Press the Phone icon on the faceplate. 2. Select the paired phone you wish to delete from the drop-down/list.

3. Press and hold the Delete soft key for two seconds. The selected phone will be deleted from memory and the display will show “Deleted”.

How Do You Delete Bluetooth Devices on a Pioneer Radio?

If you’re looking to delete a Bluetooth device from your Pioneer radio, there are just a few steps you’ll need to follow. First, make sure that the radio is in standby mode. Next, press and hold the “SRC” button for about two seconds until the display shows “BT.”

From here, use the arrow keys to select the device you want to delete and then press the “Menu” button. On the following screen, select “Delete” and then press “Enter.” The device should now be deleted from your Pioneer radio.

How Do I Reset My Pioneer Radio Bluetooth?

If you’re looking to reset your Pioneer radio’s Bluetooth, there are a few simple steps you can follow. First, make sure that your Pioneer radio is turned on and in Bluetooth mode. Next, find the “Pairing” button on your radio and press it for a few seconds until you see the pairing light start flashing.

Once the pairing light is flashing, go to your phone or other Bluetooth device and search for new devices. You should see your Pioneer radio appear in the list of available devices. Select your Pioneer radio from the list and enter the PIN code if prompted.

After a few moments, your phone or other device should be connected to your Pioneer radio via Bluetooth!

Bluetooth Memory Full – Pioneer Radio Fix


If you’re looking to clear your Pioneer AVH-120BT’s Bluetooth memory, here’s a quick and easy guide on how to do it. First, make sure that your phone is paired with the head unit. Next, go into the Bluetooth settings menu on the head unit and select “Disconnect.”

Finally, delete all of the existing paired devices from the head unit’s memory.