1. To pair Onn Wireless Headphones with your device, first ensure that the headphones are in pairing mode. This is done by pressing and holding the power button for three seconds until a blue light appears on the side of the headphones.
2. Next, open Bluetooth settings on your device and search for new devices to connect to.
The Onn Wireless Headphones will appear as an available option when searching for new devices.
3. Select “Onn Wireless Headphones” from the list of available options and accept any prompts that appear on screen during this process to confirm connection between both devices.
4. Your Onn Wireless Headphones should now be connected to your device!
- Step 1: Turn on the headphones by pressing and holding down the power button
- When you hear a beep, it means that your wireless headset has been successfully powered on
- Step 2: Put your device into pairing mode by pressing and holding down the volume up and down buttons at the same time until you hear a tone
- This will put your Onn headphones into pairing mode so they can connect to other devices
- Step 3: Activate pairing mode on your phone or device by going to its Bluetooth settings menu
- The exact steps may vary depending on which type of device you are using, but generally this should involve selecting “Add New Device” or “Pairing Mode” in the Bluetooth settings menu
- Step 4: Select “Onn Headphones” from the list of available devices when prompted for a connection request
- Once selected, there should be an audible confirmation sound indicating that both devices have been connected successfully together via Bluetooth technology
How To Pair/Reconnect ONN Headphones
How Do I Put My Wireless Headphones in Pairing Mode?
To put your wireless headphones in pairing mode, start by turning on the power switch located on the side of the headphones. Next, press and hold the pairing button for a few seconds until you hear a beep or see an indicator light that confirms it is ready to pair. Once this happens, open up your Bluetooth settings menu on your device.
Your headphones should appear as an available device in the list – select them to initiate the connection process. After a few moments, you will hear another sound confirming that they are now successfully paired with your device!
What is the Pairing Code for Onn Bluetooth Headphones?
The pairing code for Onn Bluetooth headphones is 0000. To connect your headphones to a device, ensure that the headphones are in discoverable mode and then search for them on your device’s Bluetooth menu. Once located, select your headphones and enter the code 0000 when prompted – this should establish a connection between the two devices.
It’s important to remember that each time you want to connect the same two devices, you must use the same pairing code of 0000.
Why Won T My Onn Bluetooth Headphones Connect to My Iphone?
The Onn Bluetooth headphones may not be connecting to your iPhone due to a few possible reasons. Firstly, please make sure that the headphones are charged as low battery levels can prevent Bluetooth connections from being established. Secondly, try re-pairing the device by going into your phone’s settings and forgetting the existing connection with the headphones before trying again.
If this does not work, try resetting your device by pressing and holding both volume buttons for 10 seconds until you hear a sound coming from them. Finally, if none of these solutions work, it is likely that there is an issue with either the headphone hardware or its compatibility with your iPhone model – in this case it would be best to contact customer service for further assistance.
Why Isn T My Onn Bluetooth Headphones Working?
If your Onn Bluetooth headphones are not working, the first step is to check that they are properly paired with your device. To do this, make sure both devices have their Bluetooth turned on and then search for your headphones on the list of available devices. If you have difficulty pairing or connecting, try resetting the headphones by holding down the power button for 10 seconds.
Additionally, check that you are within range of your device’s Bluetooth signal as well as making sure it has enough battery charge to operate properly. If none of these measures work, contact Onn customer service for further assistance.
Onn Bluetooth Headphones Not Pairing
If you’re having trouble pairing your Onn Bluetooth headphones, there are a few steps you can take to troubleshoot the issue. First, make sure that your device and the headphones are in close proximity with no obstructions between them. Next, ensure that both devices have been fully charged so they don’t lose connection during pairing.
Lastly, check if either device has already been paired with another device; if this is true then unpair it before trying to pair it again. If these steps do not resolve the issue then contact customer service for further assistance.
Conclusion
Overall, Onn wireless headphones are a great choice for anyone looking for a reliable and affordable pair of headphones. With its high sound quality, sleek design, and comfortable fit, Onn is an excellent option to consider when searching for the perfect pair of wireless headphones. Additionally, with its long battery life and easy set up process, users can quickly get connected to their favorite music or movie without any hassle.
Investing in a new set of Onn wireless headphones is sure to be money well spent!
